Ensure that the latch pin slides into the horizontal slit in the deadbolt when mounting the latch to the mounting plate. Then attach it with the keypad while the wires stay out of the side position.Īttach the wire harness to the back of the latch after removing the battery cover on the interior latch. Place it horizontally and remove the mounting plate from the locking mechanism. Ensure that you can pass the wire under the deadbolt. Align the keyless lock keypad to the position. You need to place the new deadbolt into the door. You can slide the sleeve in or out as you need to adjust it according to the size of the backseat Place the New Keyless Lock Deadbolt Into Your Door Usually, the standard gap is 1.5 inches to 2 inches. Otherwise, it won’t fit with your door lock. A new deadbolt needs to be in the center. Find the backset distance from the door edge. You need to place the keyless lock on the old door lock position. Measure the Backset of the Door for Installing the New One Additionally, you get batteries for the lock display, locking mechanism, and a manual guide with your keyless door lock. You will get a touchscreen keypad lock, deadbolts, and mounting hardware. Next, unbox the new lock and put the components together. Then simply pull out the lock set from the plate. Just unscrew it from the lock set by a screwdriver. You need to start by removing your existing door lock and knob from the door. Remove the Old Lock and Door Knob From the Door
0 Comments
Leave a Reply. |